WTX_D60R

WTX-D60R Twin Cylinder Wing


The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

The WTX-D twin cylinder wings are designed for twin set diving and perfectly complement the Apeks range of twin manifolds and the Tek3 regulators. Often referred to as donuts, the WTX-D wings are oval shaped air cells or bladders that are not permanently attached to a harness. Not only are these donut wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right. 

The WTX-D60R features a redundant system made up of two inner cells in one outer bag. Either cell is capable of generating 60lbs of lift when it is full. Dive with peace of mind knowing that you’re carrying a redundant system.

The Apeks twin cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, the wings are built from the finest quality materials. They are designed by Apeks and built in our own factory.



Features & Benefits

Inflator

  • K style with brass buttons
  • Low profile 16” oval-shaped hose
  • Safety cable to prevent hyper-extension
  • Positioned off-centre so as not to interfere with regulator 1st stage

Dump Valve

  • Low profile flat valve
  • Positioned in front, lower-left side

Drains:

  • 2 large drain grommets
  • Centre mesh drain panel

Materials:

  • Exterior: 1000D Armorshield Cordura
  • Inner air cell: 22mil (.022) thick black urethane
  • Zipper: heavy duty YKK #10 plastic zip and slide

 

Specifications

Style Inflator

 "K" Style w/ brass buttons

Airway

16" corrugated hose w/ simple elbow

Dump valves

1 Flat Valve - lower left

Harness

Can be used w/ WTX or webbed harness

Weight System

Optional SureLock II

Drains

Central mesh panel + 2 grommet

Retractor option

 Yes

Tank Stabilizer Bars

No

Exterior Material

1000D Armorshield Cordura

Inner bladder

22 mil (.022) thick black urethane

Zipper

Heavy Duty YKK #10

Lift Capacity (lbs/N)

WTX-D60R - 60 lbs

Max Cylinder Size 2 x 15L

Warranty

Limited Lifetime

Prices

Banner-Spaceholder
 
 
WTX-D60R Twin Cylinder Wing                
 
RRP  34,390 ฿